Millimeter Wave
Test Equipment

Millimeter Wave Instruments to EXPAND Your Measurement Capability:

Multiplier Sources

Filtered multipliers with spurs and harmonics less than -50 dBc spurs and harmonics. The units are self contained needing only +10 dBm drive and DC power (+12 to +15 VDC). Standard units available for all waveguide bands: WR-22 through WR-10. These multipliers can be used to extend the frequency coverage of any microwave source covering 8 to 20 GHz. Level detection output available as an option.

Scalar Network Analysis Systems

Complete scalar reflectometers containing filtered multiplier sources with spurs and harmonics less than -50 dBc spurs and harmonics. The units are self contained needing only +10 dBm drive and DC power (+12 to +15 VDC). Each reflectometer includes: Filtered Multiplier Source, Dual Directional Coupler, Reference, Reflection, and Transmission Detectors. Standard units available for all waveguide bands: WR-22 through WR-10. Can be used to extend the frequency coverage of any 8 to 20 GHz scalar network analysis system.

Vector Network Analysis Systems

Use with popular microwave VNA equipment to achieve millimeter wave vector/amplitude measurement capability. Can be used in either the forward direction only (S11 & S21) with one T/R module and one T module or in the forward and reverse direction (S11, S21, S22, S12) with two T/R modules. Systems are available for all waveguide bands from WR-22 to WR-05.

Waveguide VNA Calibration Kits

For calibration of the above Vector Network Analysis Systems. Contains all of the components necessary to achieve any of the popular calibration methodologies.

Harmonic Mixers

Use with popular Spectrum Analyzers to achieve millimeter wave spectrum analysis. Mixers are available for all waveguide bands from 18 to 325 GHz. L.O./I.F. diplexers are available for most modern spectrum analyzers. Optional full band measured conversion loss data available with emulation of most modern spectrum analyzers.

FCC Spurious and Harmonic Test Kit:

For use with popular Spectrum Analyzers. Each kit contains four mixers providing continuous coverage from 40 to 220 GHz. Each mixer is equipped with an appropriate horn antenna for accomplishing the desired FCC compliance tests.

300 Digital Drive, · Morgan Hill, CA 95037
Tel. (408) 779-2698 · FAX: (408) 778-0491 · email: info@omlinc.com