OLESON
MICROWAVE LABS
Millimeter
Scalar Analysis Systems
(Amendment)
OML Model Number Changes
Combined WR-42 (K Band) and WR-28 (Ka Band) Available
WR-22 (Q Band) and WR-12 (E Band) Model
Available
Filtered Sources Now Available for all
Bands
OML has changed the model numbers of the
existing reflectometer products and has added more versions and new bands to
it’s product list. The new
model numbers more accurately reflect the function and frequency of each of
these products. The WR-42/28
Model is available as a filtered source only.
The WR-22 through WR-10 Models are available in the OML reflectometer
system configuration1 or as
filtered sources. Products
are based on OML’s filtered multiplier source technology that achieves full
waveguide band performance of -20 dBc typical spurious and harmonics with “all
pass” FL-1 installed and -50 dB spurious and harmonics with “band pass”
FL-2,-3 or-4 installed. The
output of each source is terminated through a full band waveguide isolator to
provide an excellent output match. Power
shown is with FL-1 installed and is approximately 2 dB lower with the band pass
filters installed. The
products available and their frequency characteristics follow:
| Band | Reflectometer Model # | Source Model # | Frequency (GHz) | Output Power | |
| (WR-) | Current (Previous) | Current (Previous) | vs Installed Filter | Typ. w/FL-1 | |
| 42/28 | S42/28A00 (C23B001) | #1 20 to 27.5 GHz | +5 dBm | ||
| Dual Band | #2 27.5 to 40 GHz | ||||
| 22 | R22RFT | S22FS0 2 (C19A002) | 33 to 50 GHz FL-1 | +5 dBm | |
| 33 to 41 GHz FL-2 | |||||
| 40 to 50 GHz FL-3 | |||||
| 15 | R15RFT (N20RFT) | S15FS0 2 (N20RFT-2) | 50 to 75 GHz FL-1 | +5 dBm | |
|
(C20A002) |
50 to 58 GHz FL-2 | ||||
| 57 to 75 GHz FL-3 | |||||
| 12 | R12RFT | S12FS0 2 | 60 to 90 GHz FL-1 | +5 dBm | |
| 60 to 66 GHz FL-2 | |||||
| 65 to 80 GHz FL-3 | |||||
| 71 to 90 GHz FL-4 | |||||
| 10 | R10RFT (N21RFT) | S10FS0 2 (N21RFT-2) | 75 to 110 GHz FL-1 | -2 to +3 dBm / | |
|
(C21A002) |
75 to 92 GHz FL-2 | ||||
| 89 to 110 GHz FL-3 | |||||
| Notes: | 1) A full band Transmission Detector with input isolator is included with each Reflectometer. | ||||
| 2) An optional output power detector with directional coupler is available as Option -1. | |||||
As with all standard OML products, these
Sources can be upgraded at a later time to include the output power detector or
even upgraded to the full OML reflectometer configuration,
All of the information contained in the OML “Millimeter Scalar Analysis
Systems” brochure is relevant to these models with the exceptions of the model
numbers. Please use that
information as “typical” for all of the above products.
Spurious and harmonics suppression verification kits are currently
available for WR-15 and WR-10. Unfiltered
sources for WR-08, WR-06 and WR-05 are available, please request specifications.
Updated 2/25/2000
300 Digital Drive, · Morgan Hill, CA 95037
Tel. (408) 779-2698 · FAX: (408) 778-0491 · email: info@omlinc.com
|
Home | Introduction | Vector
| Sources | Scalar | Spectrum
| Power |
©
1999-2006 OML, Inc. (Oleson Microwave Labs.) All Rights Reserved.