OML - Premier Supplier of Innovative Millimeter Wave Solutions

Power

OML offers the following power accessories for use with our VNA and Source modules.

For a turn-key solution, the AC Adapter will conveniently satisfy your DC power prerequisites; however, compliance outside the US depends on local regulations. In this popular scenario, you can forego the use of a lab power supply and instead use this AC Adapter for power.

Power_Spread_Image_dv

AC Adapter, 9VDC, 4.5A
AC Adapter, 12VDC, 5A (VDCPW12-4 has been replaced with VDCPW12-5)

For local power supply compliance, the DC Adapter represents an attractive solution. Simply purchase a local power supply that satisfies compliance regulations and this DC Adapter will enable connection to OML modules.

DC Adapter, Circular Jack

The standard interface to a lab power supply is satisfied with a DC Cable.

DC Cable, Circular Jack to Banana Plug

DPL313B_close-up_ko_sm

The external mixer setup using OML’s harmonic mixer (model MxxHWD) may require the use of an external diplexer (if not already integrated within the spectrum analyzer).

For example, the Keysight PSA (model E488xA, option AYZ) requires an external diplexer; whereas, the diplexer is already integrated within the Keysight PXA (model N9030A, option EXM). In both cases, the diplexer enables signal flow between the harmonic mixer and spectrum analyzer with adequate signal separation to optimize performance for mm-wave spectrum analysis.

Another popular application of our DPL.313B diplexer is for coupling Keysight’s 11970 harmonic mixer series to the new Keysight PXA (model N9030A).

DPL26: HP 2-6 GHz, I.F. DC to 1 GHz

DPL313B: HP 3-13 GHz, I.F. DC to 1 GHz

DPL518: HP 5-18 GHz, I.F. DC to 2 GHz

Click and download available application notes from the following list

VNA Frequency Extension Modules & Waveguide Calibration Kits